Select a Country or Region

lube oil recycling
lube oil recycling
lube oil recycling
lube oil recycling
lube oil recycling
lube oil recycling
lube oil recycling
lube oil recycling
lube oil recycling
lube oil recycling

Waste oil distillation equipment

Distillation is the chemical engineering processes and other facilities used in oil refineries to distills the incoming crude oil, pyrolysis oil and waste oil into useful products such as diesel oil and fuel oils, gasoline or petrol, jet fuel, etc.

Applicable raw materials: waste engine oil, tyre pyrolysis oil, plastic pyrolysis oil

Processing capacity: Approximately 1-15 tons per unit per day;

Final products: Diesel oil, asphalt, syngas;

Share to

What is distillation

istillation is the chemical engineering processes and other facilities used in oil refineries to distills the incoming crude oil, pyrolysis oil and waste oil into useful products such as diesel oil and fuel oils, gasoline or petrol, jet fuel, etc.

Product Parameters

Project

Content

Applicable   raw materials

Waste   engine oil, waste lubrication oil, tire pyrolysis oil, plastic pyrolysis oil

final   product

Non   standard diesel, gasoline, base oil, heavy diesel 

Structure   form

Horizontal

Reactor   size

D1400*4500

5   Ton/Day

D1600*5500

10Ton/Day

D1800*5500

15   Ton/Day

Reactor   material

Q245R   or Q345R professional boiler plate

Reactor   thickness

16mm   or 18mm(according to your requirement)

Average   out-put oil rate

80%   diesel oil, 5% light oil, 10% heavy fuel oil, 5% loss

Working   pressure

Decompression   production

Available   fuel

Natural   gas, fuel oil

Total   installed power

40   kw/h

Equipment   footprint

30m*10m*8m

Cooling   method

Circulating   water

Labor   required

3-4   workers

Installation   method

Guide   installation

working   form

Continuous   operation

Working process

The waste oil vacuum distillation device is designed as a continuous production process, which pumps the waste oil into the preheating system through vacuum reduction. After heating, it is automatically sent to the distillation kettle (at room temperature -380 ℃). Adjusting the vacuum degree to -0.03mpa can obtain about 80% -85% diesel fuel. Base oil production (the requirement for raw oil production is to control the vacuum degree of base oil above -0.08mpa) adopts a continuous feeding production method. With temperature changes, the oil and gas are purified in the gas tower and enter the condensation system of the equipment. After the gas passes through the first stage condensation, 95% of the oil and gas are converted, and then enter the second stage condenser. The remaining 3% -5% of the oil and gas are converted, Subsequently, it enters the third stage vertical condensation box to prevent a small amount of oil and gas from being unable to convert. Gas that cannot be converted enters the oil gas separation system. Finally, it enters the furnace to support combustion.


01.png


Safety of waste plastic pyrolysis equipment

1) Each system on the device is equipped with a pressure gauge and thermometer. As long as the pressure exceeds the normal range, the system will automatically sound an alarm.
2)The control system is equipped with a one button emergency stop device. If there is a problem, press the emergency stop button directly to stop the device from running. The control cabinet is equipped with thermocouples and remote pressure for real-time monitoring.
3)There is a thermometer, pressure gauge, and explosion-proof valve on the water seal. Once the pressure exceeds the normal range, the equipment will automatically release the pressure.
4)Install flame arresters after water sealing to prevent backfire of the fire source.

Environment friendly:

Well water dedusting system can avoid black smoke.

The waste gas will be recycled for heating reactor, no gas pollution

Every junction of the reactor is in good sealing situation with professional sealing material.

Long service life:

Material: Q345R special steel plate ,thickness 16mm or 18mm.

Welding: Automatic welding machine with heating treatment and x-ray detection will prolong the service life of reactor to the max.

Product Usage

Items

Contents

Fuel oil(80%-90%)

Apply to tractors,   trucks, ships, diesel oil generators, power generators, etc.

syngas(10%)

Recycle it to heat the   distillation system, store the gas for heating, liquefied.

Slag(10%)

Recycle   it into furnace to heat reactor.

 

Projects around the world


02.jpg


ZHONGMIN Strength


03.png


Get A Free Quote

Name

Email

Tel

Message